High Temp Silicon

JC237-0

JC237-0 neutron moderator is a fire and heat resistant field-castable neutron shielding material. It is silicone elastomer based and has a high hydrogen content. At temperatures up to 400 °F (204.4 °C), it will retain almost 90% of its initial hydrogen for extended periods. The hydrogen content of JC237-0 is 2/3 of that found in water.

JC237-0 is available in a variety of shapes and sizes. It has a hard rubber-like consistency that will minimize any impact due to secondary missile formation and is self-extinguishing.

Field-castable multi-part liquid and powder kit (97 Lbs = 1 Ft3)
Pre-cast custom shapes in a hard rubber-like elastomer
More than half the hydrogen content of HDPE without the fire and temperature restrictions
Fire and heat-resistant material

Composition Data Important Properties
Hydrogen atom density / cm3: 4.54 x 10²²
Hydrogen weight percent: 4.79%
Hydrogen natural isotope distribution: 99.98 % ¹H
Total Density: 1.59 g/cm³ (99 lbs./ft³)
Radiation Properties
Macroscopic thermal neutron cross section: 0.02 (cm⁻¹)
Gamma resistance: 1 x 10¹⁰rad
Neutron resistance: 5 x 10¹⁸ n/cm²
Physical Properties
State: Liquid/powder mix or pre-cast solid
Color: Dark gray when cast
Odor: No significant odour
Machinability: Fair
Hardness: Shore “A” Durometer Scale = 66
Tensile Strength (ASTM D368): 50 psi (35,155 kg/ m²)
Compressive Strength: 450 psi (316,395 kg/ m²)
Thermal Properties
Recommended Temperature Limit: 204.4°C (400°F)
Heat Capacity: 0.4 cal/g °C
Specific Heat: 950 J/(Kg-K)
Thermal Conductivity: 0.584 W/(m-K)
Cubical Coefficient of Expansion: 3 x 10⁻⁴ in³/in³ °F (5.4 x 10⁻⁴ cm³/cm³ °C)
Linear Coefficient of Expansion: 1 x 10⁻⁴ in/in °F (1.7 x 10⁻⁴ cm/cm °C)
Vapor Pressure (mm Hg): 5
Evaporation Rate (ether=1): <1
Chemical Properties
Chemical Name & Synonyms: High Temperature Poly-Substitute
Trade Name & Synonyms: JC237-0
Chemical Family: Silicone Monomer
Formula: Mixture of silicone plus boron compound
Solubility in Water: <1%
Get in touch with The JCS team
Send